MACHINERY FOR THE MANUFACTURE OF AIR-CONDITION DUCT
ROLLFORMING MACHINE – VS5
Rollforming machine VS5 was specially designed to manufacture HVAC flanges of 20 and 30 mm size for medium and large producers of square HVAC duct.
The principal benefit is that it isn’t necessary any more to purchase flanges of 4 – 6 m length and cut them to various lengths. On this machine it is possible to manufacture flanges precisely according to the dimensions of the produced air ducts.
Rollforming machine VS5 consists of several parts. At the beginning, sheet metal is being unwound from the vertical decoiler, then it enters through feeding into the very profiling part. Consequently the flange is straightened and cut into desired number of pieces and of required length by hydraulic shears, precisely according to the parameters entered. Automatic line control system can be connected to central production management as well.
Change of 20-30 or 30-20 flange produced is also very easy, you only need to feed the sheet metal into the left or right part of the machine and switch over the control system.
The line can also be equipped with a device for injection of sealing mastic directly during the forming process.
Technical parameters:
- Voltage: 400 V
- Input: 5,5 kW
- Number of profiling passes: 2 x 20
- Profiling shafts diameter: 35 h 7
- Horizontal distance between shafts: 160 mm
- Profiling speed: 2 - 14 m/min. (Depends on length of flange)
- Shearing: 2 x Hydraulic shears
- Number of decoilers: standardly 2
- Strip width for flange 20 mm: 95 mm
- Strip width for flange 30 mm: 115 mm
- Sheet thickness: 0,8 mm
- Required sheet quality: DX51D + Z275 MA, (DX52D + Z 275MA) dle EN 10142/10143
- Weight: 3000 kg
- Dimensions (h x w x l): 6000 x 1800 x 1500 mm
DOWNLOAD
Rollforming Machine – VS5 (1 438 kB)
