MACHINERY FOR THE MANUFACTURE OF AIR-CONDITION DUCT

LOCKFORMING MACHINE – VS1, VS2

The machine serves to form standard profiles intended for manufacture of HVAC duct as well as other metal work. Prearranged sheet metal blanks of 0.6 – 1.2 mm thickness are processed on this machine. Profiling is carried out by seven or nine pairs of forming rolls. The machine is bilateral, so the rolls can be set up for two profiles at the same time. Forming rolls are located outside the main gear box, allowing easy replacement. All shafts are embedded on special needle bearings and the whole distributing gear box lays in oil bath. Easily adjustable guiding rulers are placed on two separate work benches. The upper part of the machine is fitted with protective cover with safety bars.

Technical parameters:

VS1:

• Number of forming passes: 7
• Recommended shapes of profiles : 1,2,3,6
• Voltage: 400 V
• Input : 2,2 kW
• Forming speed: 8 m/min
• Max. sheet thickness: 0,6 - 1,2 mm
• Weight: 430 kg
• Dimensions (h x w x l ): 1300 x 550 x 1 730 mm

VS2:

• Number of forming passes: 9
• Recommender shapes of profiles: 1,4,5
• Voltage: 400 V
• Input: 2,2 kW
• Forming speed: 8 m/min
• Max. sheet thickness: 0,6 - 1,2 mm
• Weight: 470 kg
• Dimensions (h x w x l): 1300 x 550 x 1 730 mm

DOWNLOAD

Lockforming Machine – VS1, VS2 (1 387 kB)